Loading ...
Loading ...
Loading ...
Theft-alarm system
Features and controls 5-41
5
N00510201267
The theft-alarm system is designed to provide
protection from unauthorized entry into the
vehicle. This system is operated in three
stages: the first is the “armed” stage, the sec-
ond is the “alarm” stage, and third is the “dis-
armed” stage. If triggered, the system
provides both audible and visual alarm sig-
nals.
N00510301239
Park the vehicle and stop the engine. Arm the
system as described below.
1. Except for vehicles equipped with the
F.A.S.T.-key, remove the key from the
ignition switch.
For vehicles equipped with the F.A.S.T.-
key, put the operation mode in OFF.
2. Make sure that the engine hood is closed.
3. Lock all doors and the liftgate by using
the keyless entry system or the F.A.S.T.-
key operation.
At this time, the theft-alarm indicator (A)
on the instrument panel flashes for confir-
mation.
4. The system has entered the armed stage
after approximately 20 seconds, when the
theft-alarm indicator (A) flashing
becomes slower.
The theft-alarm indicator (A) continues to
flash while the system is in the armed
stage.
NOTE
Gas struts (B) are installed in the locations
illustrated in order to support the liftgate.
Please observe the following in order to pre-
vent damage or faulty operation:
• Do not touch, push or pull the gas struts
when closing the liftgate.
• Do not attach any plastic material, tape,
etc., to the gas struts.
• Do not tie string, etc., around the gas struts.
• Do not hang objects on the gas struts.
Theft-alarm system
CAUTION
Do not modify or add parts to the theft-alarm
system. Doing so could cause the theft-alarm
to malfunction.
Armed stage
Arm the system and leave
NOTE
If the engine hood is open, the theft-alarm
indicator (A) illuminates and the system can-
not enter the armed stage.
The system enters the armed stage approxi-
mately 20 seconds after the engine hood is
closed.
BK0277700US.book 41 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...