Loading ...
Loading ...
Loading ...
Adaptive Cruise Control System (ACC) (if so equipped)
5-100 Features and controls
5
N00581700074
There are two ways to cancel the ACC con-
trol.
By pressing the “CANCEL” switch.
By depressing the brake pedal.
When the ACC is canceled, the “SET” indi-
cator goes off and the following distance indi-
cator turns to the standby display. The front
vehicle indicator also turns to the standby dis-
play when a front vehicle is detected.
In any of the situations listed below, the ACC
control is automatically canceled, a buzzer
sounds and a message is shown in informa-
tion screen of the multi-information display.
If the ACC system is in the stationary vehicle
hold state, it will also be automatically can-
celed and the Electric parking brake will
operate.
When the ASC is turned off.
While ABS, ASC or TCL is activated.
When the selector lever is in a position
other than “D” (DRIVE).
When the parking brake is applied.
When the driver’s seat belt is unfastened.
When the driver’s door is opened.
When the ACC no longer detects any
vehicle in front while it is in the stationary
vehicle hold state.
When the vehicle is in the stationary vehi-
cle hold state for 10 minutes or more.
NOTE
The set speed indication on the display turns
to “---” when the accelerator pedal is
depressed. This indication remains as long as
the pedal is in a depressed position.
In certain conditions, the braking control and
alarming functions of ACC may not work for
a short while after releasing the accelerator
pedal.
To cancel ACC control
NOTE
You can also cancel the ACC control by
pressing the ACC ON/OFF switch. If this
switch is pressed while the ACC is ON, the
ACC will be turned off.
If you press the “CANCEL” switch or ACC
ON/OFF switch to cancel the stationary
vehicle hold state, the vehicle will start
creeping.
BK0277700US.book 100 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...