OWNER'S MANUAL - Page 161

For 2020 ECLIPSE CROSS.

Loading ...
Loading ...
Loading ...
Brake assist system
5-80 Features and controls
5
3. Depress the accelerator pedal and the hill
start assist will gradually decrease the
braking force as the vehicle starts moving.
N00562801129
If an abnormal condition occurs in the sys-
tem, the following warning light/display will
turn on.
Warning light
- ASC indicator
Warning display
N00567301145
The brake assist system is a device assisting
drivers who cannot depress the brake pedal
firmly such as in emergency stop situations
and provides greater braking force.
If the brake pedal is depressed suddenly, the
brakes will be applied with more force than
usual.
NOTE
The hill start assist is activated when all of
the following conditions are met.
The engine is running.
(The hill start assist will not be activated
while the engine is starting or immediately
after the engine is started.)
The selector lever is in any position other
than “P” (PARK) or “N” (NEUTRAL).
The vehicle is completely stationary, with
the brake pedal depressed.
The parking brake is released.
The hill start assist will not operate if the
accelerator pedal is depressed before the
brake pedal is released.
The hill start assist also operates when
reversing on an uphill slope.
Warning light/display
CAUTION
If the warning is displayed, the hill start
assist will not operate. Start off carefully.
Park your vehicle in a safe place and stop the
engine.
Restart the engine and check whether the
light/display goes out, in which case the hill
start assist is again working normally.
If they remain displayed or reappear fre-
quently, it is not necessary to stop the vehicle
immediately, but the vehicle should be
inspected by an authorized Mitsubishi
Motors dealer or a repair facility of your
choice as soon as possible.
Brake assist system
CAUTION
The brake assist system is not a device
designed to exercise braking force greater
than its capacity. Make sure to always keep a
sufficient distance between your vehicle and
a vehicle in front of you without relying too
much on the brake assist system.
NOTE
Once the brake assist system is operational,
it maintains great braking force even if the
brake pedal is lightly released.
To stop its operation, completely remove
your foot from the brake pedal.
The brake assist system may become opera-
tional when the brake pedal is fully
depressed even if it has not been depressed
suddenly.
When the brake assist system is in use while
driving, you may feel as if the depressed
brake pedal is soft, the pedal moves in small
motions in conjunction with the operation
noise, or the vehicle body and the steering
wheel vibrate. This occurs when the brake
assist system is operating normally and does
not indicate faulty operation. Continue to
depress the brake pedal.
You may hear an operation noise when the
brake pedal is suddenly or fully depressed
while stationary. This does not indicate a
malfunction and the brake assist system is
operating normally.
BK0277700US.book 80 ページ 2019年3月8日 金曜日 午前9時23分
Loading ...
Loading ...
Loading ...