Loading ...
Loading ...
Loading ...
Wiper and washer switch
5-204 Features and controls
5
If your hands get trapped, you could suffer
injuries or the wipers could malfunction. Be
sure to turn the ignition switch to the “OFF”
position or put the operation mode in OFF, or
move the lever to the “OFF” position to deac-
tivate the rain sensor.
With the lever in the “AUTO” position, it is
possible to adjust the sensitivity of the rain
sensor by turning the knob (B).
• When cleaning the outside surface of the
windshield, if you touch the rain sensor.
• When cleaning the outside surface of the
windshield, if you wipe with a cloth the rain
sensor.
• When using an automatic car wash.
• A physical shock is applied to the wind-
screen or the rain sensor.
NOTE
To protect the rubber parts of the wipers, this
operation of the wipers does not take place
even if the lever is put in the “AUTO” posi-
tion when the vehicle is stationary and the
ambient temperature is approximately 32 °F
(0 °C) or lower.
Do not cover the sensor by affixing a sticker
or label to the windshield. Also, do not put
any water-repellent coating on the wind-
shield. The rain sensor would not be able to
detect the extent of rain, and the wipers
might stop working normally.
CAUTION
In the following cases, the rain sensor may
be malfunctioning. Have the vehicle checked
at an authorized Mitsubishi Motors dealer or
a repair facility of your choice.
• When the wipers operate at a constant inter-
val despite changes in the extent of rain.
• When the wipers do not operate even
though it is raining.
The wipers may automatically operate when
things such as insects or foreign objects are
affixed to the windshield on top of the rain
sensor or when the windshield is frozen.
Objects affixed to the windshield will stop
the wipers when the wipers cannot remove
them. To operate the wipers again, move the
lever to the “LO” or “HI” position.
Also, the wipers may operate automatically
due to strong direct sunlight or electromag-
netic wave. To stop the wipers, move the
lever to the “OFF” position.
Contact an authorized Mitsubishi Motors
dealer or a repair facility of your choice
when replacing the windshield glass.
NOTE
To adjust the sensitivity of the rain sensor
“+”- Higher sensitivity to rain
“-”- Lower sensitivity to rain
NOTE
Automatic wiper operation (rain sensitive)
can be changed to intermittent operation,
either vehicle speed sensitive or not vehicle
speed sensitive.
For further information, please contact your
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
On vehicles equipped with Smartphone Link
Display Audio, screen operations can be
used to make the adjustment.
Refer to the separate owner’s manual for
details.
BK0277700US.book 204 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...