Loading ...
Loading ...
Loading ...
Blind Spot Warning (BSW) (with Lane Change Assist) (if so equipped)
Features and controls 5-115
5
ON and “ON” is selected in the “BSW” set-
ting screen, the BSW indicator light in the
instrument cluster comes on and the BSW
enters the standby state.
When “OFF” is selected in the “BSW” set-
ting screen, the BSW indicator light in the
instrument cluster goes off and the BSW
turns off.
To turn the BSW ON/OFF, follow the proce-
dure below.
1. Switch to the function setting screen.
Refer to “Multi-information display
switches” on page 5-145.
Refer to “Changing the function settings”
on page 5-155.
2. Press the switch or switch several
times to switch to the “BSW” screen.
Then, press the switch to the setting
selection screen.
3. Press the switch or switch to
select “ON” or “OFF”, and then press the
switch to confirm the setting.
Indicator light
If you turn the BSW ON/OFF, the Rear Cross
Traffic Alert (RCTA) also turns ON/OFF at
the same time.
When the BSW indicator light in the instru-
ment cluster is on, if a vehicle is approaching
your vehicle in the detection area, the BSW
light in the outside rearview mirror illumi-
nates.
If the turn signal lever is operated to the side
where the BSW light is illuminated, the BSW
light will blink and the system will beep three
times to alert the driver.
NOTE
When the operation mode is set to OFF, the
selected condition (BSW ON/OFF) just
before setting to OFF is retained.
The BSW operates when all of the following
conditions are met.
• The ignition switch is turned to the “ON”
position or the operation mode is put in ON.
• The selector lever is in positions other than
“P” (PARK) and “R” (REVERSE).
• The speed of your vehicle is approximately
6 mph (10 km/h) or higher.
When the sensor detects an
approaching vehicle
NOTE
The BSW light in the outside rearview mir-
ror may come on or blink in the following
conditions.
• When driving very near the guardrail or the
concrete wall.
BK0277700US.book 115 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...