Loading ...
Loading ...
Loading ...
Keyless entry system (if so equipped)
5-10 Features and controls
5
3. Within 60 seconds after step 2, complete
the following ID code registration opera-
tion using the next key you wish to regis-
ter within 4 seconds.
4. To register the ID codes of additional
keys, repeat step 3 within 60 seconds after
step 3.
5. If no ID code of a key is registered within
60 seconds after step 3, the registration
mode is canceled and the normal mode
returns.
NOTE
ID codes for all keys except for the key used
in step 2 are erased and the answerback func-
tion (door is locked and unlocked) informs
you that the registration mode has been acti-
vated.
i) Press both the LOCK
and UNLOCK but-
tons for 2 seconds.
ii) Release both the
LOCK and UNLOCK
buttons for 1 second.
iii) Press the UNLOCK
button. The answer-
back function informs
you that the ID code
registration of the key
is completed.
NOTE
Be sure to press the buttons correctly when
performing the procedures. If you perform
the procedures incorrectly, the registered ID
code information could be deleted or the set-
tings could be changed unintentionally. If the
registered ID code information is deleted,
register the keys again.
For verification purposes, try to lock and
unlock the doors after the registration is
completed.
The indicator light (4) comes on each time a
button is pressed.
The keyless entry system does not work if
the key is in the ignition switch.
The key can be used from approximately
40 feet (12 m) away. However, this distance
may change if your vehicle is near a TV
transmitting tower, a power station, or a
radio station.
If the UNLOCK button (2) is pressed and no
doors or the liftgate are opened within
approximately 30 seconds, the doors and the
liftgate will automatically re-lock.
On vehicles equipped with the Smartphone
Link Display Audio, the functions can be
adjusted on the screen. For details, refer to
the separate owner’s manual.
If the following conditions are observed after
pressing the LOCK (1) or UNLOCK (2) but-
ton on the key, the battery in the key may
need to be replaced.
• The doors and the liftgate cannot be locked
or unlocked.
• The panic alarm cannot be operated.
• The indicator light (4) is dim or does not
come on.
If you lose your key, please contact an autho-
rized Mitsubishi Motors dealer for a replace-
ment.
If you wish to obtain an additional key,
please contact an authorized Mitsubishi
Motors dealer. A maximum of eight keys can
be programmed for your vehicle.
To use the new keys, it is necessary to regis-
ter the key with both the electronic immobi-
lizer and keyless entry system.
Also refer to “Electronic immobilizer (Anti-
theft starting system): Customer key pro-
gramming” on page 5-5.
NOTE
BK0277700US.book 10 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...