Loading ...
Loading ...
Loading ...
Forward Collision Mitigation system (FCM) (if so equipped)
5-112 Features and controls
5
CAUTION
To maintain proper performance of the FCM,
LDW, AHB and ACC;
Forward Collision Mitigation system (FCM)
Forward Collision Mitigation system with
High-Speed Braking Capability (FCM-HSBC)
• Always keep clean the windshield and front
bumper.
If the inside of the windshield where the
sensor is installed becomes dirty or fogged,
contact an authorized Mitsubishi Motors
dealer.
• Do not apply an impact or load on the sen-
sor or its surrounding area.
• Do not put anything including a sticker or
film to the outer side of windshield in front
of or surrounding the area of the sensor.
Also, do not put anything including a
sticker of film to inner side of the wind-
shield under the sensor.
• Do not attempt to detach or disassemble the
sensor and sensor mounting screw.
• The sensor front cover should not be modi-
fied or painted.
• Do not cover the sensor mounted area with
a license plate or anything such as a grill
guard, etc. {Forward Collision Mitigation
system with High-Speed Braking Capabil-
ity (FCM-HSBC) only}
CAUTION
• If the windshield is misted, remove the mist
from the windshield by using the defogger
switch.
• Maintain the wiper blades in good condi-
tion. Refer to “Wiper blades” on page 9-39.
When replacing the wiper blades, use only
Mitsubishi Motors Genuine parts or equiva-
lent.
• Do not dirty or damage the sensor.
• Do not spray glass cleaner on the sensor.
Also, do not spill liquid, such as a bever-
age, on the sensor.
• Do not install an electronic device, such as
an antenna, or a device that emits strong
electric waves, near the sensor.
• Always use tires of the same size, same
type and same brand, and which have no
significant wear differences.
• Do not modify the vehicle’s suspensions.
If the windshield in front of the sensor or in
the surrounding area of the sensor is cracked
or scratched, the sensor may not detect an
object properly. This could cause a serious
accident. Turn off the FCM and have your
vehicle inspected as soon as possible at an
authorized Mitsubishi Motors dealer.
If you need to replace the windshield, con-
tact an authorized Mitsubishi Motors dealer.
The sensor emits infrared rays when the
operation mode is in ON. Do not look into
the sensor by using optical goods such as a
magnifying glass. The infrared ray might
injure your eyes.
CAUTION
BK0277700US.book 112 ページ ２０１９年３月１２日 火曜日 午前９時３５分
Loading ...
Loading ...
Loading ...