Loading ...
Loading ...
Loading ...
Dual-zone automatic climate control air conditioning (if so equipped)
Comfort controls 7-17
7
N00737001523
Press of the temperature control switch to
increase the temperature.
Press of the temperature control switch to
decrease the temperature.
The selected temperature (A) will be shown
in the display.
The above indicates the factory settings. You
can personalize the air selection switch and
air conditioning switch to match your per-
sonal preferences.
Contact your authorized Mitsubishi Motors
dealer or a repair facility of your choice for
assistance.
Refer to “Personalizing the air conditioning
switch (Changing the function setting)” on
page 7-20.
Refer to “Personalizing the air selection
(Changing the function setting)” on page
7-19.
When the indicator light (A) goes off by
pressing the passenger’s side temperature
control switch (B) or the SYNC switch, the
driver’s side and the passenger’s side temper-
ature can be controlled independently of each
other.
Temperature control switch
NOTE
The temperature value of air conditioning is
switched in conjunction with outside temper-
ature display unit of the multi-information
display.
Refer to “Changing the temperature unit” on
page 5-158.
When the engine coolant temperature is low,
the air temperature from the heater will be
cool/cold until the engine warms up, even if
you have selected warm air with the switch.
To prevent the windshield and windows from
fogging up, the vent mode will be changed to
“ ” and the blower speed will be reduced
while the system is operating in the AUTO
mode.
When you feel that it is hotter or colder than
the set temperature, you may adjust it to your
preference.
For further information, we recommend you
consult an authorized Mitsubishi Motors
dealer or a repair facility of your choice.
When the temperature is set to the highest or
the lowest setting, the air selection and the
air conditioning will be automatically
changed as follows.
Also, if the air selection is operated manually
after an automatic changeover, manual oper-
ation will be selected.
• Quick Heating (When the temperature is set
to the highest setting)
Outside air will be introduced and the air
conditioning will stop.
• Quick Cooling (When the temperature is set
to the lowest setting)
Inside air will be recirculated and the air
conditioning will operate.
NOTE
To control the driver’s side and the
passenger’s side temperature inde-
pendently
BK0277700US.book 17 ページ ２０１９年３月８日 金曜日 午前９時２３分
Loading ...
Loading ...
Loading ...