Loading ...
Loading ...
Loading ...
Documenting Results
R&S
®
RTC1000
97User Manual 1335.7352.02 ─ 04
3. Use the softkey "SORT ENTRIES" to sort the settings files by name, type, size or
date.
4. Use the [Universal] knob to select the settings file.
5. Press "LOAD".
The settings are read an applied on the instrument.
6. To remove files that are no longer required:
a) Use the [Universal] knob to select the settings file.
b) Press "REMOVE FILE".
To import or export instrument settings
You can copy data between the instrument's internal storage "/INT/ SETTINGS" and a
USB flash drive. Make sure that the USB flash drive is connected.
1. In the "SAVE/RECALL" > "DEVICE SETTINGS" menu, press "IMPORT/EXPORT".
2. Press "SOURCE FILE" and select a source file using the [Universal] knob.
3. Press "DEST. PATH" and select a storage location using the [Universal] knob.
4. To change the file name, press "DEST. NAME".
5. Press "IMPORT/EXPORT" to copy the selected settings file.
To restore default instrument settings
â–º In the "SAVE/RECALL" > "DEVICE SETTINGS" menu, press "DEFAULT SETT.".
8.2 Reference Waveforms
References or reference waveforms are data sets that consist of settings information
and waveform data sampled by the A/D converter. References can be stored and
reloaded in internal or external storage. You can reload the data into one of the 4 refer-
ence memories RE1 to RE4, and display the references. All information (e.g. vertical
gain, time base setting, A/D converter data) is included when saving or reloading, ena-
bling a comparison between the original signal and its corresponding values.
To save and load references, a specific reference menu is available. If you want to
copy data between the instrument's internal storage and a USB flash drive, use the
"SAVE/RECALL" > "REFERENCES" menu.
To create, store and load references
1. Press the [REF] key in the Vertical section.
2. Press the [MENU] key in the Vertical section.
Reference Waveforms
Loading ...
Loading ...
Loading ...