Loading ...
Loading ...
Loading ...
Remote Commands Reference
R&S
®
RTC1000
279User Manual 1335.7352.02 ─ 04
13.16.5
I
2
C Bus
●
I
2
C - Configuration.................................................................................................279
●
Trigger...................................................................................................................280
●
Decode..................................................................................................................283
13.16.5.1
I
2
C - Configuration
BUS<b>:I2C:CLOCk:SOURce
.........................................................................................279
BUS<b>:I2C:DATA:SOURce........................................................................................... 279
BUS<b>:I2C:AMODe......................................................................................................279
BUS<b>:I2C:CLOCk:SOURce <Source>
Sets the input channel to which the clock line is connected.
Suffix:
<b>
.
1, 2
Selects the bus.
Parameters:
<Source> CH1 | CH2 | D0 .... D7
*RST: CH1
BUS<b>:I2C:DATA:SOURce <Source>
Sets the input channel to which the data line is connected.
Suffix:
<b>
.
1, 2
Selects the bus.
Parameters:
<Source> CH1 | CH2 | D0 .... D7
*RST: CH1
BUS<b>:I2C:AMODe <BusConfig>
Defines if the R/W bit of a 7-bit address is considered separately or as part of the
address. The setting defines which address lengths are available with
TRIGger:A:
I2C:MODE
Suffix:
<b>
.
1, 2
Selects the bus.
Protocol Analysis
Loading ...
Loading ...
Loading ...