Loading ...
Loading ...
Loading ...
Remote Commands Reference
R&S
®
RTC1000
174User Manual 1335.7352.02 ─ 04
TIMebase:REFerence <ReferencePoint>
Sets the reference point of the time scale (Time Reference) in % of the display. The
reference point defines which part of the waveform is shown.
See also:
TIMebase:POSition
Parameters:
<ReferencePoint> Range: 10 to 90
*RST: 50
Default unit: %
13.3.3 Acquisition
AUToscale.....................................................................................................................174
ACQuire:MODE............................................................................................................. 174
ACQuire:INTerpolate...................................................................................................... 175
ACQuire:AVERage:COUNt..............................................................................................175
ACQuire:AVERage:COMPlete?....................................................................................... 175
ACQuire:WRATe............................................................................................................ 176
ACQuire:POINts[:VALue]?...............................................................................................176
CHANnel<m>:TYPE.......................................................................................................176
CHANnel<m>:ARIThmetics.............................................................................................177
TIMebase:ROLL:ENABle................................................................................................ 177
ACQuire:FILTer:FREQuency........................................................................................... 178
ACQuire:POINts:ARATe?................................................................................................ 178
ACQuire:SRATe?........................................................................................................... 178
ACQuire:STATe..............................................................................................................178
ACQuire:TYPE.............................................................................................................. 179
ACQuire:PEAKdetect..................................................................................................... 179
ACQuire:HRESolution.................................................................................................... 180
AUToscale
Performs an autoset process: analyzes the enabled channel signals, and obtains
appropriate horizontal, vertical, and trigger settings to display stable waveforms.
Usage: Event
Asynchronous command
ACQuire:MODE <AcquisitionMode>
Selects the method of adding waveform points to the samples of the ADC in order to fill
the record length.
Acquisition and Setup
Loading ...
Loading ...
Loading ...