Loading ...
Loading ...
Loading ...
Remote Commands Reference
R&S
®
RTC1000
223User Manual 1335.7352.02 ─ 04
MEASurement<m>:AON
Starts the quick measurement.
Suffix:
<m>
.
1 (the suffix is irrelevant)
Usage: Event
MEASurement<m>:ARESult?
Returns the results of the quick measurement.
Suffix:
<m>
.
1 (the suffix is irrelevant)
Return values:
<QuickMeasData> List of values
Quick measurement results are listed in the following order:
PEAK, UPE, LPE, CYCR, CYCM, PER, FREQ, RTIM , FTIM
Usage: Query only
13.6.3 Automatic Measurements
MEASurement<m>[:ENABle]...........................................................................................223
MEASurement<m>:SOURce........................................................................................... 223
MEASurement<m>:CATegory?........................................................................................ 224
MEASurement<m>:MAIN................................................................................................224
MEASurement<m>:RESult?............................................................................................227
MEASurement<m>:DELay:SLOPe...................................................................................228
REFLevel<m>:RELative:MODE.......................................................................................228
MEASurement<m>[:ENABle] <State>
Activates or deactivates the selected measurement (1-6). Only the results of active
measurements are displayed in the result table.
Suffix:
<m>
.
1..6
Selects the measurement.
Parameters:
<State> ON | OFF
*RST: OFF
MEASurement<m>:SOURce <SignalSource>[,<ReferenceSource>]
Selects one of the active signal, reference or math channels as the source(s) of the
selected measurement. Available sources depend on the selected measurement type.
Measurements
Loading ...
Loading ...
Loading ...