Loading ...
Loading ...
Loading ...
Network Connections and Remote Operation
R&S
®
RTC1000
156User Manual 1335.7352.02 ─ 04
8. Define the "Subnetmask" and "Gateway" in the same way.
9. Select the "IP Port", the port number for SCPI socket communication. The default
port number for SCPI socket communication is 5025.
10. Select the "HTTP Port" used by the instrument.
11. Select the "Transfer" mode. The mode can either be determined automatically
("Auto"), or you can select a combination of a transfer rate and half or full duplex
manually.
12. Press "SAVE" to save the LAN parameters.
The "Link" information at the bottom of the dialog box indicates whether a LAN con-
nection was established successfully.
Check the LAN connection using the ping command in a command window on the
computer: ping <IP address>.
Using the IP address in remote control
The IP address of the instrument is part of the resource string to identify and control
the instrument. The resource string has the form:
TCPIP::‹IP_address›::‹IP_port›::SOCKET
The VISA resource string of the instrument is shown in the [SETUP] > "DEVICE
INFORMATION" window.
Example:
If the instrument has the IP address 192.1.2.3; the valid resource string is:
TCPIP::192.1.2.3::5025::SOCKET
If the LAN is supported by a DNS server, the host name can be used instead of the IP
address. The DNS server (Domain Name System server) translates the host name to
the IP address. The resource string has the form:
TCPIP::‹host_name›::‹IP_port›::SOCKET
To assign a host name to the R&S RTC1000, select [SETUP] key › "Page 2|3" ›
"DEVICE NAME".
Example:
If the host name is TEST1; the valid resource string is:
TCPIP::TEST1::5025::SOCKET
The end character must be set to linefeed (LF).
LAN Connection
Loading ...
Loading ...
Loading ...