Loading ...
Loading ...
Loading ...
Operating Basics
R&S
®
RTC1000
26User Manual 1335.7352.02 ─ 04
"POSITION"
If activated and the vertical position is changed, the value of the verti-
cal position is shown at the zero line.
"ACQ.STA-
TUS"
If activated, the information on the acquisition status is shown. In nor-
mal trigger mode, if the trigger condition is fulfilled, the information
window shows a progress display for the post-trigger and pre-trigger.
If the trigger condition is not met, the information window shows the
time since the last trigger event ("Trig?"). In automatic trigger mode,
no information is shown.
AUX. CURSORS
You can enable or disable the cursor and channel markers on the display. Select
"DEFAULTS" to rest the settings.
3.5.2 Virtual Screen
Normally, the grid of the R&S RTC1000 has 8 vertical divisions. It has also a virtual
range of 20 divisions. These virtual divisions can be used entirely by the optional digital
channels D0 to D7, the mathematical channels and the references signals. The analog
channels can use up to ±10 divisions from the center. This allows a simple and clear
display of many waveforms
Figure 3-2 illustrates the functionality of the virtual screen. The scroll bar next to the
grid indicates the position of the 8 visible divisions within the available 20 divisions. .
1. Press the [DISPLAY] key in the General section.
2. Activate "VIRTUAL SCREEN".
A scrollbar is shown to the right of the grid.
3. To activate or deactivate the scrollbar, press the [SCROLL BAR] key.
The scrollbar is shown in blue if it is active.
4. If the scrollbar is active, use the Universal knob to move the display window within
the 20 divisions of the virtual screen.
Signal Display
Loading ...
Loading ...
Loading ...