Loading ...
Loading ...
Loading ...
Mixed Signal Operation (Option R&S RTC-B1)
R&S
®
RTC1000
109User Manual 1335.7352.02 ─ 04
2. Choose the Y-position and the size of the logic channel display as you do for the
analog channels:
a) Press the softkey "0/7" in the short menu until it highlights blue.
b) To adjust size and position of all logic channels on the screen, use the vertical
[Position] and [Scale] knobs.
3. To resize and position a single channel individually:
a) Press the arrow softkeys in the short menu to choose a logic channel.
b) Press the softkey between the arrow keys to activate the channel.
c) Use the vertical [Position] and [Scale] knobs to adjust size and position of the
selected logic channel.
To reset the position and size of logic channels
1. Press the [POD] key in the Vertical section until it lights up.
2. Press the [MENU] key in the Vertical section to open the "POD" menu.
3. Press "SET TO DEFAULT POS. & SIZE" to reset the position and size of the logic
channels.
To label the individual bits of the logic probe
1. Press the [POD] key in the Vertical section until it lights up.
2. Press the [MENU] key in the Vertical section to open the "POD" menu.
3. Press "LABEL".
4. Press "BIT" and use the universal knob to select a bit.
5. To switch the display of the label on or off, press the "LABEL" softkey.
6. Press "LIBRARY" to choose a name from the list.
7. Press "EDIT LABEL" to enter a new name or to change the suggested name. You
can enter up to 8 characters.
8. Press "ACCEPT" to confirm the name in the editor.
The name is displayed on the grid and the printout. It is assigned to the signal and
moves with the waveform.
Using Logic Channels
Loading ...
Loading ...
Loading ...