Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
54
The fields that can be configured are described below:
Parameter Description
Web Session Timeout
Enter the web session timeout value here. The range is from 60 to 36000 seconds.
By default, this value is 180 seconds.
Select the Default option to use the default value.
Console Session Timeout
Enter the console session timeout value here. The range is from 0 to 1439
minutes. Enter 0 to disable the timeout. By default, this value is 3 minutes.
Select the Default option to use the default value.
Outgoing Console Session
Timeout
Enter the outgoing console session timeout value here. The range is from 0 to
1439 minutes. Enter 0 to disable the timeout. By default, this value is 0.
Select the Default option to use the default value.
Telnet Session Timeout
Enter the Telnet session timeout value here. The range is from 0 to 1439 minutes.
Enter 0 to disable the timeout. By default, this value is 3 minutes.
Select the Default option to use the default value.
Outgoing Telnet Session
Timeout
Enter the outgoing Telnet session timeout value here. The range is from 0 to 1439
minutes. Enter 0 to disable the timeout. By default, this value is 0.
Select the Default option to use the default value.
SSH Session Timeout
Enter the SSH session timeout value here. The range is from 0 to 1439 minutes.
Enter 0 to disable the timeout. By default, this value is 3 minutes.
Select the Default option to use the default value.
Outgoing SSH Session
Timeout
Enter the outgoing SSH session timeout value here. The range is from 0 to 1439
minutes. Enter 0 to disable the timeout. By default, this value is 0.
Select the Default option to use the default value.
Click the Apply button to accept the changes made.
DHCP
Service DHCP
This window is used to display and configure the DHCP service on the Switch.
To view the following window, click Management > DHCP > Service DHCP, as shown below:
Figure 4-27 Service DHCP Window
The fields that can be configured in Service DHCP are described below:
Parameter Description
Service DHCP State
Select this option to enable or disable the DHCP service.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...