Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
227
The fields that can be configured are described below:
Parameter Description
IPv6 MTU
Enter the IPv6 MTU value here. The range is from 1280 to 65534 bytes. By
default, this value is 1500 bytes. This parameter is used to configure the MTU to
be advertised in RA messages.
IPv6 State
Select to enable or disable the IPv6 interface global state here.
Click the Back button to discard the changes made and return to the previous page.
Click the Apply button to accept the changes made.
The fields that can be configured for IPv6 Address Autoconfig are described below:
Parameter Description
State
Select to enable or disable the automatic configuration of the IPv6 address using
stateless auto-configuration here.
Select the Default option to specify that if the default router is selected on this
interface, a default route will be installed using that default router. This option can
only be specified on one interface.
Click the Apply button to accept the changes made.
The fields that can be configured for Static IPv6 Address Settings are described below:
Parameter Description
IPv6 Address
Enter the IPv6 address for this IPv6 interface here.
Select the EUI-64 option to configure an IPv6 address on the interface using the
EUI-64 interface ID.
Select the Link Local option to configure a link-local address for the IPv6
interface.
Click the Apply button to accept the changes made.
After selecting the Interface IPv6 Address tab option, at the top of the page, the following page will be available.
Figure 6-12 IPv6 Interface (Detail, Interface IPv6 Address) Window
Click the Delete button to delete the specified entry.
Loading ...
Loading ...
Loading ...