Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
424
The fields that can be configured in RADIUS Global IPv6 Source Interface are described below:
Parameter Description
IPv6 RADIUS Source
Interface State
Select to enable or disable the state of the IPv6 RADIUS source interface here.
IPv6 RADIUS Source
Interface Type
Select the IPv6 RADIUS source interface type here. Options to choose from are:
• Loopback - Specifies the IPv6 RADIUS source interface type as Loopback.
• VLAN - Specifies the IPv6 RADIUS source interface type as VLAN.
Interface ID
Enter the IPv6 RADIUS source interface ID here.
The Loopback interface range is from 1 to 8.
The VLAN interface range is from 1 to 4094.
Click the Apply button to accept the changes made.
The fields that can be configured in RADIUS Server Attribute Settings are described below:
Parameter Description
RADIUS Server Attribute
NAS-IP-Address
Enter the IPv4 address of the RADIUS server attribute 4 in the RADIUS packet
here.
RADIUS Server Attribute
Event-Timestamp
Select to enable or disable the RADIUS server attribute event-timestamp function
here.
Click the Apply button to accept the changes made.
RADIUS Server Settings
This window is used to display and configure the RADIUS server settings.
To view the following window, click Security > RADIUS > RADIUS Server Settings, as shown below:
Figure 9-31 RADIUS Server Settings Window
The fields that can be configured are described below:
Parameter Description
IP Address
Enter the RADIUS server IPv4 address here.
IPv6 Address
Enter the RADIUS server IPv6 address here.
Authentication Port
Enter the authentication port number used here. This value must be between 0
and 65535. By default, this value is 1812. If no authentication is used, use the
value 0.
Loading ...
Loading ...
Loading ...