Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
47
SNMP Host Table Settings
This window is used to display and configure the recipient of the SNMP notification.
To view the following window, click Management > SNMP > SNMP Host Table Settings, as shown below:
Figure 4-15 SNMP Host Table Settings Window
The fields that can be configured are described below:
Parameter Description
Host IPv4 Address
Enter the IPv4 address of the SNMP notification host.
Host IPv6 Address
Enter the IPv6 address of the SNMP notification host.
User-based Security Model
Select the security model here. Options to choose from are:
• SNMPv1 - Select to allow the group user to use the SNMPv1 security
model.
• SNMPv2c - Select to allow the group user to use the SNMPv2c security
model.
• SNMPv3 - Select to allow the group user to use the SNMPv3 security
model.
Security Level When selecting SNMPv3 in the User-based Security Model drop-down list, this
option is available.
• NoAuthNoPriv - Specify that there will be no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
• AuthNoPriv - Specify that authorization will be required, but there will be no
encryption of packets sent between the Switch and a remote SNMP
manager.
• AuthPriv - Specify that authorization will be required, and that packets sent
between the Switch and a remote SNMP manger will be encrypted.
UDP Port
Enter the UDP port number. The range of UDP port numbers is from 1 to 65535.
Some port numbers may conflict with other protocols. By default, this value is 162.
Community String /
SNMPv3 User Name
Enter the community string or SNMPv3 user name to be sent with the notification
packet.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Loading ...
Loading ...
Loading ...