Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
220
Proxy ARP
This window is used to display and configure the Proxy ARP settings. The Proxy ARP feature will allow the Switch to
reply to ARP requests destined for another device by faking its identity (IP and MAC Address) as the original ARP
responder. Therefore, the Switch can then route packets to the intended destination without configuring static routing
or a default gateway. The host, usually a Layer 3 Switch, will respond to packets destined for another device.
To view the following window, click L3 Features > ARP > Proxy ARP, as shown below:
Figure 6-3 Proxy ARP Window
The fields that can be configured are described below:
Parameter Description
Proxy ARP State
Select to enable or disable the Proxy ARP state here.
Local Proxy ARP State
Select to enable or disable the local Proxy ARP state here. This local Proxy ARP
function allows the Switch to respond to the Proxy ARP, if the source IP and
destination IP are in the same interface.
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
ARP Table
This window is used to display and configure the ARP table settings.
To view the following window, click L3 Features > ARP > ARP Table, as shown below:
Figure 6-4 ARP Table Window
The fields that can be configured are described below:
Parameter Description
Interface VLAN Enter the interface VLAN ID used here. This value must be between 1 and 4094.
Loading ...
Loading ...
Loading ...