Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
321
Parameter Description
Select the Default option to use the default value.
SA Filter In Select the Configured option and enter the SA filter-in string here. This string can
be up to 32 characters long. The router will receive all SA messages sent to it from
a specified peer. By not specifying this string, the router will ignore all SA
messages sent to it from a specified peer. By configuring this string, the router will
only receive incoming SA messages from a specified peer that matches the (S, G)
pairs defined in the standard IP access list.
SA Filter Out Select the Configured option and enter the SA filter-out string here. This string
can be up to 32 characters long. The router will forward all SA messages to an
MSDP peer. By not specifying this string, the router will stop forwarding SA
messages to a specified peer. By specifying this string, the router only forwards SA
messages that match (S, G) pairs defined in the standard IP access list to a
specified peer.
SA Filter Request Select the Configured option and enter the SA filter request string here. This
string can be up to 32 characters long. The router will process all SA request
messages from a specified peer. By not specifying this string, the router will stop
processing Source-Active request messages from a specified peer. By specifying
this string, the router only processes SA request messages that request groups
that are defined in the standard IP access list from a specified peer.
Minimum TTL
Enter the minimum TTL time value here. The range is from 0 to 225. When the SA
messages are sent from MSDP peers, If the Time-To-Live (TTL) value of multicast
data packets in SA message will be decreased, if the decreased TTL value is
smaller than minimum TTL value of the MSDP peer the SA message was sent to,
the SA will not be sent out. By default, this value is 0.
Select the Default option to use the default value.
SA Cache Maximum
Enter the maximum SA cache value here. The range is from 0 to 256. When the
maximum number of SA cache entries is configured to zero, the Switch cannot
learn a SA cache entry from the peer. When the maximum number of SA cache
entries is configured to be smaller than the existing SA cache entries, the older
existing SA cache entries will be removed until the number of SA cache entries is
equal to the maximum number.
Select the None option to specify that no limitation is applied for the number of
Source-Active cache entries.
Click the Back button to return to the previous window.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...