Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
51
RMON Alarm Settings
This window is used to display and configure alarm entries to monitor an interface.
To view the following window, click Management > RMON > RMON Alarm Settings, as shown below:
Figure 4-22 RMON Alarm Settings Window
The fields that can be configured are described below:
Parameter Description
Index
Enter the alarm index. The range is from 1 to 65535.
Interval
Enter the interval in seconds for the sampling of the variable and checking against
the threshold. The range is from 1 to 2147483647 seconds.
Variable
Enter the object identifier of the variable to be sampled.
Type Select the monitoring type. Options to choose from are Absolute and Delta.
Rising Threshold
Enter the rising threshold value between 0 and 2147483647.
Falling Threshold
Enter the falling threshold value between 0 and 2147483647.
Rising Event Number
Enter the index of the event entry that is used to notify the rising threshold-crossing
event. The range is from 1 to 65535. If not specified, no action is taken while
crossing the ringing threshold.
Falling Event Number
Enter the index of the event entry that is used to notify the falling threshold-
crossing event. The range is from 1 to 65535. If not specified, no action is taken
while crossing the falling threshold.
Owner
Enter the owner string up to 127 characters.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Loading ...
Loading ...
Loading ...