Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
327
IP Multicast Route Settings
This window is used to display and configure the IP multicast route settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > IP Multicast Route
Settings, as shown below:
Figure 6-131 IP Multicast Route Settings Window
The fields that can be configured in Static Multicast Route Settings are described below:
Parameter Description
Source Address
Enter the network address of the multicast source here.
Mask
Specifies the network mask for the multicast source here.
RPF Address
Enter the RPF neighbor IP address to reach the network here.
Selecting the NULL option specifies that the RPF check will always fail for
multicast traffic sent from this source network.
Click the Apply button to accept the changes made.
The fields that can be configured in IP Multicast Route Table are described below:
Parameter Description
Summary
Selecting this option specifies to display a one-line, abbreviated summary of each
entry in the IP multicast routing table.
Static
Selecting this option specifies to display the multicast static routes.
Multicast Protocol
Select this option and then select the multicast protocol that will be used in this
display here. Options to choose from are:
• PIM-DM - Specifies to display only the PIM-DM routes.
• PIM-SM - Specifies to display only the PIM-SM routes.
• DVMRP - Specifies to display only the DVMRP routes.
Group Address
Select and enter the multicast group IP address here.
Source Address
Enter the source IP address here.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the entries.
Loading ...
Loading ...
Loading ...