Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
301
The fields that can be configured in Register Suppression Time are described below:
Parameter Description
Register Suppression
Enter the register suppression timeout value here. The range is from 3 to 65535
seconds. When a DR receives the register stop message, it will start the
suppression timer. During the suppression period, a DR stops sending the register
message to the RP.
Use this feature on the first hop router. The value of the register probe time must
be less than half the value of the register suppression time to prevent a possible
negative value in the setting of the register stop timer. The minimal value for the
register suppression time is 3. By default, this value is 60 seconds.
Select the Default option to use the default value.
Click the Apply button to accept the changes made.
The fields that can be configured in Register Keepalive Time are described below:
Parameter Description
Register Keepalive
Enter the register keep-alive time value here. The range from 1 to 65525 seconds.
By default, this value is 185 seconds.
Select the Default option to use the default value.
Click the Apply button to accept the changes made.
After clicking the Show List button, the following page will appear.
Figure 6-97 PIM Register Settings (Show List) Window
The fields that can be configured are described below:
Parameter Description
ACL Type
Select the ACL type that will be used to display the type of existing access lists in
the table here. Options to choose from are Standard IP ACL, Extended IP ACL,
Standard IPv6 ACL, Extended IPv6 ACL, Extended MAC ACL, and Extended
Expert ACL.
ACL List
Select the radio button of the access list in the table that will be used here.
Click the Find button to display a list of access lists based on the selection made.
Click the Show All button to display all configured access lists.
Loading ...
Loading ...
Loading ...