Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
307
designated interface as the BSR address. A PIM-SM domain must contain a unique BSR (Bootstrap Router) which is
responsible for collect and advertise the RP information.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for
IPv6 BSR Candidate Settings, as shown below:
Figure 6-104 PIM for IPv6 BSR Candidate Settings Window
The fields that can be configured are described below:
Parameter Description
Interface Name
Enter the VLAN interface name used here.
Hash Mask Length
Enter the hash mask length for RP selection here. The range is from 0 to 128. The
mask (128 bits maximum) that is to be logically AND with the group address before
the hash function is executed. All groups with the same seed hash (correspond) to
the same RP. Therefore, one RP can be derived for multiple groups. By default,
this value is 126.
Select the Default option to use the default value.
Priority
Enter the priority value for the BSR candidate here. The range is from 0 to 255.
The BSR with the larger priority is preferred. If the priority values are the same, the
router with the larger IPv6 address is the BSR. By default, this value is 64.
Select the Default option to use the default value.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to delete an entry based on the information entered.
Loading ...
Loading ...
Loading ...