Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
33
Click the Find button to locate a specific entry based on the information entered.
Click the Delete Periodic button to delete the periodic entry.
Click the Delete button to delete the specified entry.
Reset Button Settings
This window is used to configure the Reset button settings.
To view the following window, click System > Reset Button Settings, as shown below:
Figure 3-29 Reset Button Settings Window
The fields that can be configured are described below:
Parameter Description
Reboot
Select to enable or disable the reboot state of the reset button on the Switch.
When enabled, pressing the reset button on the Switch within 5 seconds will
reboot the Switch.
Zero Touch Provision
Select to enable or disable the ZTP state of the reset button on the Switch. When
enabled, pressing the reset button on the Switch between 5 and 10 seconds will
initiate ZTP.
Factory Default
Select to enable or disable the factory reset state of the reset button on the Switch.
When enabled, pressing the reset button on the Switch more than 10 seconds will
reset the Switch to factory defaults.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...