Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
404
The fields that can be configured in Port Security Trap Rate Settings are described below:
Parameter Description
Trap Rate
Enter the number of traps per second. The range is from 0 to 1000. By default, this
value is 31. This indicates that an SNMP trap is generated for every security
violation.
Click the Apply button to accept the changes made.
The fields that can be configured in Port Security System Settings are described below:
Parameter Description
System Maximum Address
Enter the maximum number of secure MAC addresses allowed. The range is from
1 to 3328. By default, there is no limit.
Tick the No Limit checkbox to allow the maximum number of secure MAC
address.
Click the Apply button to accept the changes made.
Port Security Port Settings
This window is used to display and configure the port security port settings.
To view the following window, click Security > Port Security > Port Security Port Settings, as shown below:
Figure 9-2 Port Security Port Settings Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the appropriate port range used for the configuration here.
State
Select to enable or disable the port security feature on the port(s) specified.
Maximum
Enter the maximum number of secure MAC addresses that will be allowed on the
port(s) specified. This value must be between 0 and 3328. By default, this value is
32.
Violation Action
Select the violation action that will be taken here. Options to choose from are:
Loading ...
Loading ...
Loading ...