Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
298
PIM RP Candidate
This window is used to display and configure the PIM RP candidate settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv4 > PIM RP
Candidate, as shown below:
Figure 6-93 PIM RP Candidate Window
The fields that can be configured in RP Candidate Global Settings are described below:
Parameter Description
Priority
Enter the candidate RP's priority value here. The range is from 0 to 255. By
default, this value is 192.
Select the Default option to use the default value.
Interval
Enter the candidate RP's advertisement interval value here. The range is from 1 to
16383 seconds. By default, this value is 60 seconds.
Select the Default option to use the default value.
Wildcard Prefix Count
Enter the multicast group address wildcard (224.0.0.0/4) prefix count value in the
C-RP message here. This value can either be 1 or 0. By default, this value is 0.
Select the Default option to use the default value.
Click the Apply button to accept the changes made.
The fields that can be configured in RP Candidate Settings are described below:
Parameter Description
Interface Name
Enter the name of the interface here.
Group Access List Name Enter the standard access list that will be used here. Alternatively, click the Show
List button to find and select any of the exiting access lists configured on this
Switch to be used in this configuration.
Select the All Groups option to map the candidate RP to all multicast groups.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to delete an entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Loading ...
Loading ...
Loading ...