Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
356
Parameter Description
• Set-1P-Transmit - Specifies to enter the 1P transmit value in the space
provided. This value sets the 802.1p value and transmits the packet with the
new value.
• Transmit - Specifies that packets will be transmitted unaltered.
• Set-DSCP-1P - Specifies to enter the IP DSCP and 1P transmit values in
the spaces provided.
By default, the Drop option is used. Packets are dropped.
Violate Action
Select the violate action here. The violate action specifies the action to take on
packets that violate the normal and maximum burst sizes for singe rate policing. It
specifies the action to take for those packets that did not conform to both CIR and
PIR. Options to choose from are:
• None - Specifies that no action will be taken.
• Drop - Specifies that the packet will be dropped.
• Set-DSCP-Transmit - Specifies to enter the IP DSCP value in the space
provided. This value sets the IP differentiated services code point (DSCP)
value and transmits the packet with the new IP DSCP value.
• Set-1P-Transmit - Specifies to enter the 1P transmit value in the space
provided. This value sets the 802.1p value and transmits the packet with the
new value.
• Transmit - Specifies that packets will be transmitted unaltered.
• Set-DSCP-1P - Specifies to enter the IP DSCP and 1P transmit values in
the spaces provided.
By default, for a single rate policer, a single-rate two-color policer is created.
By default, for a two-rate policer, the Drop option is used. Packets are dropped.
Color Aware
Select the color aware option here. Options to choose from are:
• Enabled - Specifies that the policer work in the color-aware mode.
• Disabled - Specifies that the policer work in the colorblind mode.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To view the following window, select the Two Rate Settings tab, as shown below:
Figure 7-15 Aggregate Policer (Two Rate Settings) Window
Loading ...
Loading ...
Loading ...