D-Link DGS-1520 Dgs-1210 Smart Managed Gigabit Switches

User Manual - Page 201

For DGS-1520.

PDF File Manual, 598 pages, Read Online | Download pdf file

DGS-1520 photo
Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
191
The fields that can be configured are described below:
Parameter Description
Minimum Version
Select the minimum version of MLD hosts that is allowed on the VLAN. Options to
choose from are 1 and 2.
Fast Leave
Select this option to enable or disable the MLD snooping Fast Leave function. If
enabled, the membership is immediately removed when the system receives the
MLD done message from the last member.
Report Suppression
Select this option to enable or disable the report suppression.
Suppression Time
Enter the interval of suppressing duplicate MLD reports or leaves. The range is
from 1 to 300.
Proxy Reporting
Select this option to enable or disable the proxy-reporting function.
Source Address
Enter the source IP of proxy reporting.
This is available when Enabled is selected in Proxy Reporting.
Multicast Router Port
Learning
Select this option to enable or disable Multicast Router port learning.
Querier State
Select this option to enable or disable the querier state.
Query Version
Select the general query packet version sent by the MLD snooping querier.
Options to choose from are 1 and 2.
Query Interval
Enter the interval at which the MLD snooping querier sends MLD general query
messages periodically. The range is from 1 to 31744.
Max Response Time
Enter the maximum response time, in seconds, advertised in MLD snooping
queries. The range is from 1 to 25.
Robustness Value
Enter the robustness variable used in MLD snooping. The range is from 1 to 7.
Last Listener Query Interval
Enter the interval at which the MLD snooping querier sends MLD group-specific or
group-source-specific (channel) query messages. The range is from 1 to 25.
Rate Limit
Enter the rate limit value here. The range is from 1 to 1000.
Tick the No Limit option to apply no rate limit on this profile.
Ignore Topology Change
Select to enable or disable the Ignore Topology Change feature here.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...