Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
27
System Log Server Settings
This window is used to display and configure the system log server settings.
To view the following window, click System > System Log > System Log Server Settings, as shown below:
Figure 3-22 System Log Server Settings Window
The fields that can be configured are described below:
Parameter Description
Host IPv4 Address
Enter the system log server IPv4 address here.
Host IPv6 Address
Enter the system log server IPv6 address here.
UDP Port
Enter the system log server UDP port number here. This value must be either 514
or between 1024 and 65535. By default, this value is 514.
Severity
Select the severity value of the type of information that will be logged. Options to
choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4
(Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).
Facility Select the facility number that will be logged here. The range is from 0 to 23. Each
facility number is associated with a specific facility. See the table below:
Number Name Description
0
kern Kernel messages
1
user User-level messages
2
mail Mail system
3
daemon System daemons
4
auth1 Security/authorization messages
5
syslog Messages generated internally by the
SYSLOG
6
lpr Line printer sub-system
7
news Network news sub-system
8
uucp UUCP sub-system
9
clock1 Clock daemon
10
auth2 Security/authorization messages
11
ftp FTP daemon
12
ntp NTP subsystem
13
logaudit Log audit
14
logalert Log alert
15
clock2 Clock daemon
Loading ...
Loading ...
Loading ...