Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
106
There are some instances where pre-saved MS Switches cannot be rediscovered. For example, if the Switch is still
powered down, if it has become the member of another group, or if it has been configured to be a Commander Switch,
the rediscovery process cannot occur.
The topology map now includes new features for connections that are a member of a port trunking group. It will
display the speed and number of Ethernet connections creating this port trunk group.
This version will support Switch upload and downloads for firmware, configuration files, and log files, as follows:
• Firmware - The Switch now supports MS firmware downloads from a TFTP server.
• Configuration Files - This Switch now supports the downloading and uploading of configuration files both to
(for configuration restoration) and from (for configuration backup) MSs, using a TFTP server.
• Log - The Switch now supports uploading MS log files to a TFTP server.
The user may zoom in and zoom out when utilizing the topology window to get a better, more defined view of the
configuration.
NOTE: When the SIM State is enabled and the Role State of the Switch is Commander, the
Topology, Firmware Upgrade, Configuration File Backup/Restore, and Upload Log File
windows will be available.
Single IP Settings
This window is used to display and configure the SIM settings. The Switch is set as a Candidate (CaS) as the factory
default configuration and Single IP Management is disabled.
To view the following window, click Management > Virtual Stacking (SIM) > Single IP Settings, as shown below:
Figure 4-88 Single IP Settings Window
The fields that can be configured in SIM State Configure are described below:
Parameter Description
SIM State
Select this option to enable or disable the SIM state on the Switch. Select
Disabled to disable SIM on the Switch.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...