Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
556
Log Description Severity
interface-id: The interface on which the host is authenticated.
vlan-id: The VLAN ID on which the host exists.
Event Description: A host failed to pass the authentication.
Log Message: MAC-based Access Control host login fail (MAC: <mac-address>,
<interface-id>, VID: <vlan-id>)
Parameters Description:
mac-address: The host MAC addresses.
interface-id: The interface on which the host is authenticated.
vlan-id: The VLAN ID on which the host exists.
Critical
Event Description: The authorized user number on the whole device has reached the
maximum user limit.
Log Message: MAC-based Access Control enters stop learning state
Warning
Event Description: The authorized user number on the whole device is below the maximum
user limit in a time interval.
Log Message: MAC-based Access Control recovers from stop learning state
Warning
Event Description: The authorized user number on an interface has reached the maximum
user limit.
Log Message: <interface-id> enters MAC-based Access Control stop learning state
Parameters Description:
interface-id: The interface on which the host is authenticated.
Warning
Event Description: The authorized user number on an interface is below the maximum user
limit in a time interval.
Log Message: <interface-id> recovers from MAC-based Access Control stop learning state
Parameters Description:
interface-id: The interface on which the host is authenticated.
Warning
MSTP Debug
Log Description Severity
Event Description: Used to record the event that Spanning Tree Protocol is enabled.
Log Message: Spanning Tree Protocol is enabled
Informational
Event Description: Used to record the event that Spanning Tree Protocol is disabled.
Log Message: Spanning Tree Protocol is disabled
Informational
Event Description: Used to record MSTP instance topology change event.
Log Message: Topology changed (Instance : <Instance-id>,<interface_id>,
MAC:<macaddr>)
Parameters Description:
Instance-id: MST instance ID. Instance 0 represents for default instance, CIST.
interface_id: The port number, which detects or receives topology change information.
macaddr: The system of bridge MAC address.
Notification
Event Description: Used to record MSTP instance new root bridge selected.
Log Message: [CIST | CIST Regional | MSTI Regional] New Root bridge selected
([Instance: <Instance-id>] MAC: <macaddr> Priority :<priority>)
Parameters Description:
Instance-id: MST instance id. Instance 0 represents for default instance, CIST.
macaddr: The system of bridge MAC address.
priority: The bridge priority value must be divisible by 4096.
Informational
Event Description: Used to record MSTP instance new root port selected.
Log Message: New root port selected (Instance:<Instance-id>, <interface_id>)
Notification
Loading ...
Loading ...
Loading ...