Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
517
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
Source File
In this field, the source firmware file's filename and path will be displayed after
selection.
To navigate to the location of the firmware file located on the local PC, either
double click in the text box or click the Browse button.
Destination File
Enter the destination path and location where the new firmware should be stored
on the Switch. This field can be up to 64 characters long.
Click the Upgrade button to initiate the firmware upgrade.
Firmware Upgrade from TFTP
This window is used to initiate a firmware upgrade from a TFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from TFTP, as
shown below:
Figure 13-3 Firmware Upgrade from TFTP Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
TFTP Server IP
Select and enter the IP address of the TFTP server here.
• IPv4 - Select and enter the IPv4 address of the TFTP server here.
• IPv6 - Select and enter the IPv6 address of the TFTP server here.
Source File
Enter the source filename and path of the firmware file located on the TFTP server
here. This field can be up to 64 characters long.
Destination File
Enter the destination path and location where the new firmware should be stored
on the Switch. This field can be up to 64 characters long.
Click the Upgrade button to initiate the firmware upgrade.
Loading ...
Loading ...
Loading ...