Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
314
Click the Apply button to accept the changes made.
PIM for IPv6 SPT Threshold Settings
This window is used to display and configure the Shortest Path Tree (SPT) threshold settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for
IPv6 SPT Threshold Settings, as shown below:
Figure 6-114 SPT Threshold Settings Window
The fields that can be configured are described below:
Parameter Description
SPT Threshold
Select the SPT threshold value here. Options to choose from are:
• Infinity - Specifies to always rely on the shared tree.
• 0 - Specifies to establish the source tree right at the arrival of the first
packet.
By default, the Infinity option is used.
Select the Default option to use the default setting.
Click the Apply button to accept the changes made.
PIM for IPv6 SSM Settings
This window is used to display and configure the IPv6 PIM SSM settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for
IPv6 SSM Settings, as shown below:
Figure 6-115 PIM for IPv6 SSM Settings Window
The fields that can be configured are described below:
Parameter Description
Multicast Group Address
Name
Enter the name of the access list that defines the user-specified SSM group
address here.
Select the Default SSM Group option to use the default SSM group address
range. By default, the SSM group address range is FF3x::/32.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to delete an entry based on the information entered.
Loading ...
Loading ...
Loading ...