Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
310
PIM for IPv6 RP Candidate
This window is used to display and configure the IPv6 PIM RP candidate settings. Only one group access list can be
specified for each interface. The latest configuration overrides the previous one. This feature can be issued multiple
times for different interfaces. This configuration causes the router to send a PIMv2 message advertising itself as a
candidate RP to the BSR.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for
IPv6 RP Candidate, as shown below:
Figure 6-108 PIM for IPv6 RP Candidate Window
The fields that can be configured are described below:
Parameter Description
Interface Name
Enter the interface name here whose IPv6 address will be advertised as the
candidate RP (C-RP).
Group Access List Name
Enter the standard IPv6 access list that will be used here. Alternatively, click the
Show List button to find and select any of the exiting access lists configured on
this Switch to be used in this configuration.
Select the All Groups option to map the candidate RP to all multicast groups.
Priority
Enter the RP priority value here. The range is from 0 to 255. By default, this value
is 192.
Select the Default option to use the default value.
Interval
Enter the RP candidate advertisement interval value here. The range is from 1 to
16383 seconds. By default, this value is 60 seconds.
Select the Default option to use the default value.
Click the Add button to add a new entry based on the information entered.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Loading ...
Loading ...
Loading ...