Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
273
Parameter Description
Hello Interval
Enter the Hello Interval value between the hello packets that the router sends on
an interface here. The range is from 1 to 65535 seconds. By default, this value is
10 seconds.
Select the Default option to use the default value.
Dead Interval
Enter the Dead Interval value, during which no packets are received and after
which a neighbor is regarded as offline, here. The range is from 1 to 65535
seconds. By default, this value is 40 second.
Select the Default option to use the default value.
Transmit Delay
Enter the transmit delay value here that the router uses to wait before it transmits a
packet. The range is from 1 to 65535 seconds. By default, this value is 1 second.
Select the Default option to use the default value.
Retransmit Interval
Enter the retransmit interval value here that the router uses to wait before it
retransmits a packet. The range is from 1 to 65535 seconds. By default, this value
is 5 seconds.
Select the Default option to use the default value.
Click the Apply button to accept the changes made.
The fields that can be configured in OSPF Virtual Link Table are described below:
Parameter Description
Process ID
Enter the ID for an IPv6 OSPF routing process here. The range is from 1 to 65535.
Click the Find button to locate a specific entry based on the information entered.
Click the Process ID link (1) to access and configure the specified OSPFv3 virtual link.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Process ID link (1), the following page will appear.
Figure 6-64 OSPFv3 Virtual Link Settings (Process ID) Window
Click the OK button to close the window and return to the previous window.
Loading ...
Loading ...
Loading ...