Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
323
Parameter Description
RP Address
Enter the RP address that will be used here.
Click the Find button to find and display an entry based on the information entered.
Click the Clear button to clear the entries from the table based on the information entered.
MSDP Static RPF Settings
This window is used to display and configure the MSDP static RPF settings. Before configuring a static RPF peer, an
MSDP peer must be added first. If the RP prefix list is specified, the peer will be a static RPF peer only for RPs in the
prefix list. When multiple static RPF peers are specified without an RP prefix list, only the connected peer whose
address is smallest will be the active static RPF peer. If an MSDP peer is configured as a static RPF peer multiple
times, only the last configuration takes effect. If there is one MSDP peer only, this MSDP peer works as a static RPF
peer.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > MSDP > MSDP Static
RPF Settings, as shown below:
Figure 6-127 MSDP Static RPF Settings Window
The fields that can be configured are described below:
Parameter Description
Peer Address
Enter the MSDP peer address here.
RP List
Enter the name of the standard IP access list that defines the RP prefix list here.
This string can be up to 32 characters long.
Click the Apply button to accept the changes made.
Click the Find button to find and display an entry based on the information entered.
Loading ...
Loading ...
Loading ...