D-Link DGS-1520 Dgs-1210 Smart Managed Gigabit Switches

User Manual - Page 141

For DGS-1520.

PDF File Manual, 598 pages, Read Online | Download pdf file

DGS-1520 photo
Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
131
Parameter Description
Native VLAN
Tick this option to enable the native VLAN function. Also, select if this VLAN
supports Untagged or Tagged frames.
VID After ticking the Native VLAN option, the following parameter will be available.
Enter the VLAN ID used for this configuration here. This value must be between 1
and 4094.
Action Select the action that will be taken here. Options to choose from are All, Add,
Remove, Except, and Replace.
Allowed VLAN Range
Enter the allowed VLAN range here.
Clone
Select this option to enable the clone feature.
Unit
Select the unit ID of the Switch in the stack here.
From Port - To Port
Select the range of ports that will be used in the clone feature here.
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
When Dot1q-Tunnel was selected as the VLAN Mode, the following page will appear.
Figure 5-20 VLAN Interface (802.1Q-Tunnel) Window
The fields that can be configured are described below:
Parameter Description
VLAN Mode Select the VLAN mode option here. Options to choose from are Access, Hybrid,
Trunk, Dot1q-Tunnel, Promiscuous, and Host.
Acceptable Frame
Select the acceptable frame behavior option here. Options to choose from are
Tagged Only, Untagged Only, and Admit All.
Ingress Checking
Select to enable or disable the ingress checking function.
VLAN Precedence Select the VLAN precedence option here. Options to choose from are Mac-based
VLAN and Subnet-based VLAN.
VID
Enter the VLAN ID used for this configuration here. This value must be between 1
and 4094.
Action Select Add to add a new entry based in the information entered.
Select Remove to remove an entry based in the information entered.
Add Mode Select to add an Untagged parameter.
Allowed VLAN Range
Enter the allowed VLAN range here.
Clone
Select this option to enable the clone feature.
Loading ...
Loading ...
Loading ...