D-Link DGS-1520 Dgs-1210 Smart Managed Gigabit Switches

User Manual - Page 20

For DGS-1520.

PDF File Manual, 598 pages, Read Online | Download pdf file

DGS-1520 photo
Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
10
Port Configuration
Port Settings
This window is used to display and configure the Switch's port settings.
To view the following window, click System > Port Configuration > Port Settings, as shown below:
Figure 3-4 Port Settings Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the stacking unit ID of the Switch that will be configured here.
From Port - To Port
Select the appropriate port range used for the configuration here.
State
Select to enable or disable the physical port state here.
MDIX
Select the Medium Dependent Interface Crossover (MDIX) option here. Options to
choose from are:
• Auto - Select this option for auto-sensing of the optimal type of cabling.
• Normal - Select this option for normal cabling. If this option is selected, the
port is in the MDIX mode and can be connected to a PC NIC using a
straight-through cable or a port (in the MDI mode) on another Switch
through a crossover cable.
• Cross - Select this option for crossover cabling. If this option is selected, the
port is in the MDI mode and can be connected to a port (in the MDIX mode)
on another Switch through a straight cable.
Flow Control Select to turn flow control On or Off here. Ports configured for full-duplex use
802.3x flow control and Auto ports use an automatic selection of the two.
Note: This feature will not work through Switches that are physically stacked.
Duplex Select the duplex mode used here. Options to choose from are Auto, Half, and
Full.
NOTE: Due to hardware limitation, half-duplex operation is not supported on
the 2.5 Gbps ports when the speed is operating at 100 Mbps. Only full-duplex
operation is supported. For 100 Mbps half-duplex operation, connect to any of
the 1 Gbps ports.
Speed
Select the port speed option here. This option will manually force the connection
speed on the selected port to connect at the specified speed only.
Loading ...
Loading ...
Loading ...