Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
247
The fields that can be configured are described below:
Parameter Description
Interface VLAN
Enter the VLAN interface ID here. The range is from 1 to 4094.
Select the All Interface option to use all available interfaces in this configuration.
State
Select to enable or disable the IPv6 RIP feature on the VLAN interface specified.
Metric Offset
Enter the value to be added to the metric of an IPv6 RIP route received on the
configured interface here. The range is from 1 to 16. The metric refers to the hop
count. By default, when receiving an IPv6 RIP route, a metric value of 1 is added
to the route before it is inserted into the routing table. Use this option to influence
the metric of routes received on different interfaces and influence the preference of
the route.
Select the Default option to use the default metric offset value.
Passive Interface
Select to enable or disable the passive interface feature here. If this option is
disabled, the router will not send RIPng packets out through the interface.
However, RIPng packets from other routers received on the interface will continue
to be processed.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
RIPng Database
This window is used to display the RIPng routing database.
To view the following window, click L3 Features > RIPng > RIPng Database, as shown below:
Figure 6-35 RIPng Database Window
The fields that can be configured are described below:
Parameter Description
IPv6 Address/Prefix Length
Enter the IPv6 address that will be used for these results here.
Click the Find button to locate a specific entry based on the information entered.
Loading ...
Loading ...
Loading ...