Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
476
Storm Control Settings
This window is used to display and configure the storm control settings.
To view the following window, click Security > Storm Control Settings, as shown below:
Figure 9-88 Storm Control Settings Window
The fields that can be configured in Storm Control Trap Settings are described below:
Parameter Description
Trap State
Select the storm control trap option here. Options to choose from are:
• None - No traps are sent.
• Storm Occur - A trap notification is sent when a storm event is detected.
• Storm Clear - A trap notification is sent when a storm event is cleared.
• Both - A trap notification is sent when a storm event is detected and
cleared.
Click the Apply button to accept the changes made.
The fields that can be configured in Storm Control Polling Settings are described below:
Parameter Description
Polling Interval
Enter the interval value used here. This value must be between 5 and 600
seconds. By default, this value is 5 seconds.
Shutdown Retries
Enter the shutdown retries value used here. This value must be between 0 and
360. By default, this value is 3.
Tick the Infinite option to disable this feature.
Click the Apply button to accept the changes made.
The fields that can be configured in Storm Control Port Settings are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
Loading ...
Loading ...
Loading ...