Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
234
The fields that can be configured are described below:
Parameter Description
IP Address Enter the IPv4 address for this route here. Tick the Default Route option to use
the default route as the IPv4 address.
Mask
Enter the IPv4 network mask for this route here.
Gateway
Enter the gateway address for this route here.
Null Interface
Select to enable or disable the NULL interface here.
Backup State
Select the backup state option here. Options to choose from are:
• Primary - Specifies the route as the primary route to the destination.
• Backup - Specifies the route as the backup route to the destination.
• Weight - Specifies a weight number greater than zero, but less than the
maximum paths number. This number is used to replicate identical route
paths (multiple copies) in the routing table, so the paths get more chance of
being hit for traffic routing. Enter the weight value in the space provided. The
range is from 1 to 4.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IPv4 Route Table
This window is used to display and configure the IPv4 route table settings.
To view the following window, click L3 Features > IPv4 Route Table, as shown below:
Figure 6-21 IPv4 Route Table Window
The fields that can be configured are described below:
Parameter Description
IP Address
Select and enter the single IPv4 address here.
Network Address
Select and enter the IPv4 network address here. In the first space enter the
network prefix and in the second space enter the network mask.
RIP
Select this option to display only RIP routes.
OSPF
Select this option to display only OSPF routes.
Connected
Select this option to display only connected routes.
Loading ...
Loading ...
Loading ...