D-Link DGS-1520 User Manual

Loading ...

DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide

130

The fields that can be configured are described below:

Parameter Description

VLAN Mode Select the VLAN mode option here. Options to choose from are Access, Hybrid,

Trunk, Dot1q-Tunnel, Promiscuous, and Host.

Acceptable Frame

Select the acceptable frame behavior option here. Options to choose from are

Tagged Only, Untagged Only, and Admit All.

Ingress Checking

Select to enable or disable the ingress checking function.

VLAN Precedence Select the VLAN precedence option here. Options to choose from are Mac-based

VLAN and Subnet-based VLAN.

Native VLAN

Tick this option to enable the native VLAN function.

VID After ticking the Native VLAN option, the following parameter will be available.

Enter the VLAN ID used for this configuration here. This value must be between 1

and 4094.

Action Select the action that will be taken here. Options to choose from are Add,

Remove, Tagged, and Untagged.

Add Mode Select whether to add an Untagged or Tagged parameters.

Allowed VLAN Range

Enter the allowed VLAN range here.

Clone

Select this option to enable the clone feature.

Unit

Select the unit ID of the Switch in the stack here.

From Port - To Port

Select the range of ports that will be used in the clone feature here.

Click the Apply button to accept the changes made.

Click the Back button to discard the changes made and return to the previous page.

When Trunk was selected as the VLAN Mode, the following page will appear.

Figure 5-19 VLAN Interface (Trunk) Window