Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
303
The fields that can be configured are described below:
Parameter Description
Multicast Group Address
Name
Enter the standard IP access list name here that defines the user-specified SSM
group addresses. The group address should be defined in the destination IP
address field of the rule entry. Alternatively, click the Show List button to find and
select any of the exiting access lists configured on this Switch to be used in this
configuration. Selecting the Default SSM Group (232.0.0.0/8) option specifies to
use the default SSM group addresses. By default, the SSM group address range is
232/8.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to delete an entry based on the information entered.
After clicking the Show List button, the following page will appear.
Figure 6-100 PIM SSM Settings (Show List) Window
The fields that can be configured are described below:
Parameter Description
ACL Type
Select the ACL type that will be used to display the type of existing access lists in
the table here. Options to choose from are Standard IP ACL, Extended IP ACL,
Standard IPv6 ACL, Extended IPv6 ACL, Extended MAC ACL, and Extended
Expert ACL.
ACL List
Select the radio button of the access list in the table that will be used here.
Click the Find button to display a list of access lists based on the selection made.
Click the Show All button to display all configured access lists.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the Apply button to use the selected access list.
Loading ...
Loading ...
Loading ...