Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
211
LLDP Dot3 TLVs Settings
The LLDP Dot3 TLVs Settings page is used to enable or disable outbound LLDP advertisements for IEEE 802.3
organizationally unique TLVs.
To view the following window, click L2 Features > LLDP > LLDP Dot3 TLVs Settings, as shown below:
Figure 5-103 LLDP Dot3 TLVs Settings Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the appropriate port range used for the configuration here.
MAC/PHY
Configuration/Status
Select this option to enable or disable the MAC/PHY Configuration/Status TLV to
send. The MAC/PHY Configuration/Status TLV is an optional TLV that identifies (1)
the duplex and bit-rate capability of the sending IEEE 802.3 LAN node, and (2) the
current duplex and bit-rate settings of the sending IEEE 802.3 LAN node.
Link Aggregation
Select this option to enable or disable the Link Aggregation TLV to send. The Link
Aggregation TLV indicates contains the following information. Whether the link is
capable of being aggregated, whether the link is currently in an aggregation, and
the aggregated port channel ID of the port. If the port is not aggregated, then the
ID is 0.
Maximum Frame Size
Select this option to enable or disable the Maximum Frame Size TLV to send. The
Maximum Frame Size TLV indicates the maximum frame size capability of the
implemented MAC and PHY.
Power Via MDI
Select this option to enable or disable the power via MDI TLV to send. IEEE 802.3
PMD implementations allow power to be supplied over the link for connected non-
powered systems. The Power Via MDI TLV allows network management to
advertise and discover the MDI power support capabilities of the sending IEEE
802.3 LAN station.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...