Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
320
Click the Find button to find and display an entry based on the information entered.
Click the Clear button to clear the entries from the table based on the information entered.
Click the Clear All button to clear all the entries from the table.
Click the Clear Statistics button to clear the statistics information of the entries based on the information entered.
Click the Clear All Statistics button to clear all the statistics information displayed in the table.
Click the Edit button to re-configure the specific entry.
Click the Show Detail button to display detailed information about the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
Figure 6-124 MSDP Peer Settings (Edit) Window
The fields that can be configured are described below:
Parameter Description
Description
Enter the description for the MSDP peer here. This string can be up to 80
characters long.
Shutdown
Select to enable or disable the shutdown feature here. The shutdown state must
be configured on an existing MSDP peer. If the MSDP peer is in the shutdown
state, the TCP connection between two peers won't be established. If the MSDP
peer was changed into the no shutdown state, the TCP connection between two
peers will attempt to re-establish.
Password
Enter the MD5 password for a TCP connection between two peers here. MD5
authentication must be configured with the same password on both MSDP peers.
Otherwise, the connection between them cannot be established.
Keep-Alive
Enter the keep-alive time value here. The range is from 1 to 21845 seconds. The
keep-alive interval should be less than the hold time configured on the remote side
of the MSDP TCP connection. Otherwise, the remote side of MSDP TCP
connection may be disconnected before receiving the MSDP keep-alive message.
Selecting the Infinity option specifies the MSDP peer to never send keep-alive
messages. By default, this value is 60 seconds.
Select the Default option to use the default value.
Hold Time
Enter the hold-time value here. The range is from 3 to 65535 seconds. The hold
time interval must be larger than keep-alive time configured on the remote side of
the MSDP TCP connection. Otherwise, the MSDP TCP connection may be
disconnected before receiving the MSDP keep-alive message.
Select the Infinity option to specify that the connection between two peers is never
torn down.
Loading ...
Loading ...
Loading ...