Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
270
After clicking the Process ID link (1) button, the following page will appear.
Figure 6-61 OSPFv3 Interface Settings (Process ID) Window
The fields that can be configured are described below:
Parameter Description
Cost
Enter cost value here. It is an integer value expressed as the link-state metric. The
range is from 1 to 65535.
Select the Default option to use the default value.
Hello Interval
Enter the Hello Interval value, between the hello packets that the router sends on
an interface here. This value is advertised in the hello packets. The shorter the
Hello Interval, the earlier topological changes will be detected, but more routing
traffic will ensue. This value must be the same for all routers and access servers
on a specific network. The range is from 1 to 65535 seconds. By default, this value
is 10 seconds.
Select the Default option to use the default value.
Dead Interval
Enter the Dead Interval value here, during which no packets are received and after
which a neighbor is regarded as offline. The interval is advertised in router hello
packets. This value must be the same for all routers and access servers on a
specific network. The range is from 1 to 65535 seconds. By default, this value is 40
seconds.
Select the Default option to use the default value.
Priority
Enter the priority value of the router here. The range is from 0 to 255. Set the
priority to help determine the OSPF Designated Router (DR) for a network. If two
routers attempt to become the DR, the router with the higher router priority
Loading ...
Loading ...
Loading ...