Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
243
Click the Edit button to configure the RIP interface settings for the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
Figure 6-31 RIP Interface Settings (Edit) Window
The fields that can be configured are described below:
Parameter Description
Send Version
Select which version of RIP packets can be sent on the interface. Options to
choose from are v1 and v2.
Receive Version
Select which version of RIP packets can be received on the interface. Options to
choose from are v1, and v2, and v1/v2.
Send Version 2 Broadcast
Select to enable or disable the sending of version 2 RIP update packets as
broadcast packets instead of multicast packets.
Authentication Mode
Select to enable or disable the authentication mode here. Options to choose from
are:
• Disabled - Specifies to disable RIP authentication on the interface.
• Text - Specifies to enable RIP authentication on the interface.
Authentication Text
Password
After RIP authentication was enabled on the interface, select and enter the text
password here. This can be up to 16 characters long.
Select None to use an empty password.
Passive Interface
Select to enable or disable the passive interface function here. This is used to
disable the sending of routing updates on an interface. The Switch will not send
multicast RIP packets out through the interface however, RIP packets from other
routers received on this interface will continue to be processed.
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
Loading ...
Loading ...
Loading ...