Loading ...
Loading ...
Loading ...
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
389
Extended IPv6 ACL
After selecting an Extended IPv6 ACL and clicking the Add Rule button, the following page will appear.
Figure 8-17 Extended IPv6 ACL (Add Rule) Window
The fields that can be configured are described below:
Parameter Description
Sequence No.
Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If
this value is not specified, the system will automatically generate an ACL rule
number for this entry.
Action Select the action that this rule will take here. Options to choose from are Permit,
Deny, and Deny CPU.
Protocol Type Select the protocol type option here. Options to choose from are TCP, UDP, ICMP,
Protocol ID, ESP (50), PCP (108), SCTP (132), and None.
• Value - The protocol ID can also manually be entered here. The range is
from 0 to 255.
• Mask - After selecting the Protocol ID option, manually enter the protocol
mask value here. The range is from 0x0 to 0xFF.
• Fragments - Select this option to include packet fragment filtering.
Source
Select and enter the source information here. Options to choose from are:
• Any - Any source traffic will be evaluated according to the conditions of this
rule.
• Host - Enter the source host IPv6 address here.
• IPv6 - The Prefix Length option will be available. Enter the source IPv6
address and prefix length value in the spaces provided.
Destination
Select and enter the destination information here. Options to choose from are:
• Any - Any destination traffic will be evaluated according to the conditions of
this rule.
Loading ...
Loading ...
Loading ...